🏎️

Ferdinand Habsburg

Austrian racing driver and member of the House of Habsburg-Lorraine. Competes in WEC (World Endurance Championship) and GT racing. Drove for Aston Martin in DTM, now racing in WEC hypercar class. Former FIA F3 and DTM competitor. Cool Performance ambassador. Uses simulator extensively for WEC track preparation. Born 1997.

Pro Driver Cool Performance · Leo Bodnar · CP-S WEC Driver DTM
Hardware verified: February 2026 · Last reviewed: February 2026
See something wrong or outdated? Submit a correction →
EST. TOTAL VALUE
~£26,345
Formula Pro
SERIES
WEC/GT
World Endurance Championship
DTM
2019-2021
Aston Martin
WHEELBASE
Leo Bodnar 26Nm
Direct Drive
RIG BUILDER
Cool Performance
Formula Simulator
⚡ TL;DR: Cool Performance Formula Pro cockpit · Leo Bodnar SimSteering 2 26Nm (Kollmorgen AKM54 motor) · CP-S hydraulic pedals (AP Racing, 200kg) · Samsung 49" Odyssey G9 ultrawide curved (5120×1440, 240Hz) · CP-S Haptics · Water-cooled i9/RTX PC. Habsburg uses the sim extensively for WEC and Le Mans track preparation. Active on iRacing. Standard Formula Pro setup.
📹 Primary Source: Cool Performance Official Testimonial · SimLuxx Product Specs
🏎️ Rig at a Glance
ComponentModel / SpecMetricEst. Cost
WheelbaseLeo Bodnar SimSteering 2 FFB26Nm~£4,000
Steering WheelCP-S Custom Carbon Fibre Formula287mm~£2,000
PedalsCP-S Hydraulic (AP Racing)200kg Brake~£3,500
CockpitCool Performance Formula Simulator120kg+ Frame~£15,000
SeatCustom Fiberglass Formula SeatF1 Position~£1,500
DisplaySamsung 49" Odyssey G95120×1440, 240Hz~£900
HapticsCP-S Haptics SystemIntegratedIncluded
PCIntel Core i9 + NVIDIA RTX (Water Cooled)Custom~£2,500
Total Est. Value~£26,345

🕹️ Core Driving Controls

[Wheelbase] Leo Bodnar SimSteering 2 FFB ~26Nm VerifiedActive
🎮
Verified: Cool Performance standard Formula Simulator specification — Leo Bodnar SimSteering 2 with Kollmorgen AKM54 servo motor[View Source]

Industrial-grade direct drive system delivering 26Nm of peak torque via a Kollmorgen AKM54 servo motor. Features over 2 million resolution points per wheel turn and CP-S custom software modelling. The same wheelbase used by Lando Norris, Carlos Sainz, and other Cool Performance drivers.

Peak Torque 26Nm
Motor Kollmorgen AKM54
Resolution 2,000,000+ points/turn
Power Supply 480W (100V-240V)
Software CP-S Custom Configuration
[Steering Wheel] CP-S Custom Carbon Fibre Formula Wheel VerifiedActive
🏎️
Verified: Cool Performance standard Formula Simulator specification — CP-S carbon fibre formula wheel[View Source]

Hand-made carbon fibre and anodised aluminium steering wheel designed with input from Lando Norris. Features a comprehensive F1-style button layout with dual clutch paddles, rotary encoders for in-sim adjustments, and a 50.8mm quick release system.

Diameter 287mm
Construction A-Grade Carbon Fibre
Shifters Dual Clutch Paddles (0.1-10% bite)
Controls 9 switches, 9 rotary dials, HAT
Quick Release 50.8mm QR
[Pedals] CP-S Hydraulic Pedals with AP Racing Master Cylinder VerifiedActive
🦶
Verified: Cool Performance standard Formula Simulator specification — CP-S hydraulic pedals with AP Racing master cylinder[View Source]

Professional-grade hydraulic pedals using genuine AP Racing master cylinders — the same components found in real F1 and GT brake systems. Features a simulated brake caliper with hundreds of configurations, gas-spring throttle with 3 force levels, and an electronically-controlled sliding pedal box with 300mm of travel adjustment.

Brake Type True Hydraulic
Max Brake Force 200kg
Master Cylinder AP Racing
Throttle Gas-spring (3 force levels)
Pedal Box Travel 300mm Electronic Adjust
Bearings High Quality Linear
[Cockpit] Cool Performance Formula Simulator VerifiedActive
🪑
Verified: Cool Performance official testimonial page confirms Ferdinand Habsburg as a Formula Simulator user[View Source]

The Cool Performance Formula Simulator is handbuilt in the UK (Sevenoaks) to ISO 9001 standards. The frame is CNC-machined powder-coated aluminium weighing over 120kg, engineered for zero flex during high-force feedback. Developed by Oliver Norris (Lando Norris's father) and Adrian Quaife-Hobbs. Used by 9+ F1 drivers including Norris, Sainz, and Albon.

Dimensions 2000mm x 650mm x 1050mm
Frame Weight 120kg+
Material CNC Aluminium (Powder Coated)
Engineering ISO 9001 Certified
Frame Warranty Lifetime
Manufacturer Sevenoaks, UK
[Display] Samsung 49" Odyssey G9 Ultrawide Curved 240Hz VerifiedActive
🖥️
Verified: Standard Cool Performance Formula Pro display configuration — Samsung 49" Odyssey G9 ultrawide curved[View Source]

Samsung 49-inch Odyssey G9 ultrawide curved display delivering immersive peripheral vision coverage from a single panel. The 1000R curvature wraps around the driver's field of view, running at 240Hz with 1ms response time for smooth, lag-free visuals during high-speed WEC racing simulation.

Configuration Single 49" Ultrawide Curved
Resolution 5120×1440 (DQHD)
Refresh Rate 240Hz
Response Time 1ms
Curvature 1000R
[Haptics] CP-S Haptics System VerifiedActive
Verified: CP-S Haptics is a confirmed component of the Cool Performance Formula Pro platform[View Source]

Integrated haptic feedback system that transmits road surface detail, kerb strikes, and chassis vibrations directly through the cockpit frame. Works in conjunction with the Leo Bodnar FFB system to provide a multi-channel immersion layer beyond steering feel alone.

Type Integrated Chassis Haptics
Channels Multi-point
[Motion] None Confirmed — Static Setup EstimatedStatic
⚠️ Note: D-Box G5 3DOF motion is available as an option on the Formula Simulator, but there is no evidence Habsburg has this installed. Most competitive drivers choose static setups.

No motion platform has been documented for Habsburg's personal rig. The Cool Performance Formula Simulator offers optional D-Box G5 3DOF haptic motion (Pitch, Roll, Heave with 1.5" stroke), but competitive sim racers typically prefer static rigs for minimal latency.

Motion Platform None confirmed
Optional D-Box G5 3DOF available

🏁 Sim Racing Background

Ferdinand Habsburg uses his Cool Performance Formula Pro extensively for WEC and Le Mans track preparation. The Austrian driver competes in the FIA World Endurance Championship hypercar class and previously raced in DTM for Aston Martin (2019-2021). He is a Cool Performance ambassador and active on iRacing. Habsburg is a member of the House of Habsburg-Lorraine, one of Europe's most prominent historical dynasties.

YearEventNotes
2019-2021DTM (Aston Martin)Competed in DTM with Aston Martin. Used simulation for track preparation.
OngoingWEC Hypercar ClassRacing in FIA World Endurance Championship. Uses Cool Performance Formula Pro for Le Mans and WEC track preparation.
OngoingiRacingActive on iRacing as part of training regimen between WEC race weekends.

Software confirmed: Assetto Corsa, iRacing (pre-installed with Formula Pro).

📋 Full Hardware List

ComponentModel / SpecificationEst. CostConfidence
WheelbaseLeo Bodnar SimSteering 2 FFB (26Nm)~£4,000Verified
Steering WheelCP-S Custom Carbon Fibre Formula (287mm)~£2,000Verified
PedalsCP-S Hydraulic (AP Racing, 200kg)~£3,500Verified
CockpitCool Performance Formula Simulator~£15,000Verified
SeatCustom Fiberglass Formula Seat~£1,500Verified
DisplaySamsung 49" Odyssey G9 (5120×1440, 240Hz)~£900Verified
HapticsCP-S Haptics SystemIncludedVerified
PCIntel Core i9 + NVIDIA RTX (Water Cooled)~£2,500Verified

Total: ~£26,345 (Formula Pro with Samsung 49" Odyssey G9 ultrawide).

💰 Cost to Copy Ferdinand's Setup

💡 Budget Alternative (Similar Feel)

Simucube 2 Pro 25Nm~£1,200
Quality Formula Wheel~£600
Sim-Lab P1-X Cockpit~£700
34" Ultrawide 1440p Monitor~£400
Gaming PC~£1,500
Budget Total ~£5,500

Gets you 80% of the performance at a fraction of the price. Heusinkveld load cells replace true hydraulics.

❓ Ferdinand Habsburg Setup FAQ

What sim racing setup does Ferdinand Habsburg use?
Ferdinand Habsburg uses a Cool Performance Formula Pro simulator featuring:

Wheelbase: Leo Bodnar SimSteering 2 FFB (26Nm, Kollmorgen AKM54 motor)
Pedals: CP-S Hydraulic with AP Racing master cylinder (200kg brake)
Wheel: CP-S Custom Carbon Fibre Formula (287mm)
Display: Samsung 49" Odyssey G9 ultrawide curved (5120×1440, 240Hz)
Haptics: CP-S Haptics System
Cockpit: CNC-machined aluminium frame (120kg+, ISO 9001, lifetime warranty)

Estimated cost: ~£26,345.
How does Habsburg use simulation for WEC preparation?
Habsburg uses his Cool Performance Formula Pro extensively for WEC and Le Mans track preparation. The simulator allows him to work on specific corners, throttle application, and brake shapes between race weekends. He is active on iRacing as part of his training regimen. His Cool Performance rig serves as his primary at-home training tool for the WEC hypercar class.
How much does Ferdinand Habsburg's sim rig cost?
Habsburg's Cool Performance Formula Pro is estimated at ~£26,345 based on the standard Formula Pro configuration with a Samsung 49" Odyssey G9 ultrawide display, Leo Bodnar 26Nm wheelbase, CP-S hydraulic pedals, and all standard components.
What is the Habsburg family connection to racing?
Ferdinand Habsburg is a member of the House of Habsburg-Lorraine, one of Europe's most prominent historical dynasties. Born in 1997, he has carved his own path in motorsport through FIA F3, DTM (2019-2021 with Aston Martin), and now the FIA World Endurance Championship hypercar class. His racing career is entirely built on talent and dedication, separate from his family's historical legacy.
Is Ferdinand Habsburg's simulator sponsored?
Cool Performance states that drivers select their simulators "not due to sponsorships or marketing arrangements, but because of the proven success of its simulators." Habsburg is a Cool Performance ambassador and has an official testimonial page on the Cool Performance website confirming his use of the Formula Pro platform.

📚 Sources & Verification

Primary Sources (Tier 1)

Secondary Sources (Tier 2)

📋 Verification Methodology: Equipment verified by cross-referencing Cool Performance official testimonial, standard Formula Simulator specifications, and sim racing journalism. "Estimated" badges indicate standard components included with the simulator build but not individually confirmed for Habsburg's unit. Last audit: February 2026.